One last thought... If you have a blog or are a member of a Woodworking newsgroup please post a link to this blog to help boost our Google ranking. Thanks, Scott
UPDATE: Well, that didn't take long at all! These saws are all sold out, and now Delta is introducing an upgraded version. I guess that explains the blow-out price, huh? Anyway, the new model is the 40-695, and it will be available in March 2012. Here's a preview pic, which you can click on to Biggie-Size.
Certainly this will be sold by Woodcraft, so check it out here: Link to Delta Scroll Saws for sale at Woodcraft.
Below is a video from "John the TIA guru" that runs the Dewalt Owners Group. In the video John does a run down on the DEWALT DWP611PK Compact Router.
Click this link for the DEWALT DWP611PK Compact Router Kit at Woodcraft
Click this link for the Porter-Cable 450PK Compact Router Kit at Woodcraft
If you are interested in handsome and strong joinery you already know that mortise and tenon joints are the way to go.Yes, pocket hole joinery is all the rage, and I have three Kreg jigs myself, but when I want to build furniture that will be passed-down to my grand kids I know I'll be making mortises and dovetails.
Try as I might I was never able to get good results mortising with my Mark V.It takes a LOT of force to drive a four-sided chisel into a block of hardwood, and not only does the quill handle suffer from a size problem, but just as you make some progress the table wants to move on ya.This is not a good prize, especially because Murphy's Law dictates that you won't notice that your mortises are not as deep as you planned until some time after removing all of the mortising gear from your Mark V.
My mortiser is a PowerMatic 719, which wouldn't ya know I purchased just months before the 719T with tilting table was released. (Grumble). Before forking out the big bucks for my mortiser I researched all the tabletop units, and I just wasn't going to be able to cut the mortise depths that many of the projects I had planned would require.At the time the market was dominated by Delta, Jet and a couple questionable no-name imports.
As I mentioned in a prior post, I was at my local Woodcraft the other day and at a Rockler a couple weeks back and was amazed at the improvements that have been made in benchtop units.The one that caught my eye was the WoodRiver at Woodcraft, which as a huge base with extensions that expand to 35" in width to support for your stock.This unit has a firm fence and rollers that act as hold-ins to keep your stock firmly against the fence. The fence is made of cast iron and is adjusted with a rack and pinion that reminds me of a mini version of the fence on my Delta jointer.
One of the biggest hassles that benchtop mortisers tend to introduce is caused by very limited access to the drill chuck. The WoodRiver has two HUGE clear plastic doors that swing open for practically unhindered access. Another neat thing about this design is that because the doors are clear they allow plenty of light to make bit changes as easy as I've ever seen.
Another advantage of this unit wasn't obvious from a study of the manual: It's ambidextrous. The two access doors swing open on both the right and the left. Likewise, as you can see from the bottom photo, the lever handle can be mounted left or right. With the switchbox on the left I thought there might be a problem using it on the left, but nope, she worked just fine.
The thing that really surprised me was that it comes with a full set of four chisels and bits and the mortiser has a full 5" depth of cut! Seeing this made me curious, so I measured my PowerMatic and learned that while it has a 6" stroke, all of my chisels are 5" long!
So, if you are in the market for a great looking, reasonably priced mortiser, check the WoodRiver out at:
WoodRiver Mortiser with Chisels and Bits
(Anderson,SC, January 18, 2011) – Chang Type Industrial Co. Ltd., a Taiwan-basedmanufacturing company, has agreed to purchase the Delta brand ofwoodworking equipment and machinery from Stanley Black & Decker. Thedeal is expected to close on February 4, 2011.
The new,independent company, Delta Power Equipment Corporation, will be based inAnderson County, South Carolina and led by Bryan Whiffen, who has beennamed President & Chief Executive Officer. Norm MacDonald has alsojoined the company as an Executive Vice President & Chief OperatingOfficer. Both Whiffen and MacDonald have years of experience in thepower tool industry, and have been responsible for manufacturing andmarketing such brands as Ryobi, Homelite, Milwaukee and Ridgid.
Thenew Delta company will continue to provide a complete line ofprofessional woodworking equipment and machinery, and will continue tobuild the world-class Unisaw, as well as the Biesemeyer® accessories, inthe United States. Plans are to move the manufacturing equipment fromJackson, Tennessee to the company’s facility in Anderson.
Oncefully operational, the Anderson facility will include manufacturing,R&D, engineering, sales and administrative functions.
“Weare pleased to be able to say that the Unisaw will continue to be madein the USA,” said Whiffen. “We are also excited for this opportunity toinvest in the great Delta brand so that we can bring high quality,innovative woodworking equipment to Delta’s loyal customers.
DeltaPower Equipment Corp. is working to ensure that the fine sales andservice that Delta dealers and woodworkers have come to expect willcontinue.
“Stanley Black & Decker has been very supportiveof this sale and have agreed to help us make the transition as seamlessas possible for our dealers and our customers,” added Whiffen.
Customers and dealers can continue to obtain information on sales and service for Delta woodworking equipment at www.deltamachinery.com.
Until the end of October they have sets of 170 titanium nitride coated brad point drill bits for $39! This is 1/2 price, or if you prefer, 50% off.
The set has 5 - 10 bits of each size: 1?16", 5?64", 3?32", 7?64", 1?8", 9?64",5?32", 11?64", 3?16", 13?64", 7?32", 15?64", 1?4", 17?64", 9?32", 5?16",21?64", 11?32" & 3?8"
The set is in a nice box, and it also includes a drill size gauge.
I'm not usually a sucker for TiN coated bits, because I've seen too many sets at Harbor Freight where the manufacturer obviously coats the bits that have the worse edges in order to hide their sins. What a scam! They take their scraps and put 50 cents of electroplating on them and charge a premium! Anyway, TiN coatings help to reduce heat on the cutting edge for increased bit life, and this Woodcraft set looks very nice.
They also have a set of standard metal-drilling bits at half price. Take a look at these sets at Woodcraft.com
Sale ends October 30th.Don't ask me why it's not through the 31st.
I own two Kreg jigs; one that's 10-12 years old and made of aluminum. It does a fine jog, but was limited to 3/4" lumber. It has no dust collection option and the two hole pattern is not adjustable. If I want to space the holes closer or further apart I have to unclamp the part and relocate it.
My second Kreg jig was purchased about two ears ago and is made entirly of plastic. It does not make provisions for dust collection, and though it requires me to take it apart and add or remove parts, it will allow me to drill stock up to 2" thick. It has three drilling locations, but they are not adjustable, so I still wind-up moving the parts between drilling operations. Kreg has since change this tool and has added a dust chute. I gave it a go one afternoon at my local Woodcraft and am convinced that the version I have is superior. They did relocate the clamp, so at least it's not on the opposite side of the stock from the drilling action.
Enter the Porter Cable Qick Jig:
This tool was introduced at the IWF show in Atlanta in Aug and it is purported to be accurate and repeatable. I can't believe with as slow as the show was this year that I was still unable to leave our hall and visit the tool hall, so at this point I have to take the word of my buddy Scott Philips. He says that you simply place the material in the jig,slide the guide mechanism into place, tighten down and drill.
Unlike the Kreg jig, there's a single location for the stop collar on the drill bit, and there's even a fixture built into the jig to help you set it. On my Kreg jig I have to change the stop collar for different material thicknesses and even have purchased a second bit and collar because it was such a hasstle.
It's got an automatic depth control that allows for differentmaterial thicknesses, so again, there's no adding and subtracting of parts.
One of the most interesting things about the jig is that you can adjust the distance between the drill holes with its Variable Spaced Bushings. No more clamping and unclamping between every hole.
The first time I watched the video it apeared that there was quite a bit of fumbeling between drilling operations, but upon further investigation it turns out that once you have it set for your project you simply lock and unlock the mail (lower) clamp between joints. The top clamp is only adjusted if you need to change the board thickness or the hole spacing.
And though it's not a huge deal, the dust that's created from a pocket hole jig does pile-up fater that you'd believe, so a dust chute would be nice. The PC Quick Jig has just such a dust port.
Click here to see (and buy) the Porter Cable Qick Jig from Woodcraft.com
Watch my buddy Scott Philips as Doug Harmon walks him through the new Qick Jig.
This shirt features an image from one of the original US Patents for the Unisaw. Click on the image to see the shirt at Zazzle, or on the PatentPlaceUSA link below to see other woodworking tool tees and gifts.
This is from the dashboard that eBay gives us to track the traffic from our Tool-Hunter blogs, and what it shows is the number of bids placed by our readers and the success rate of their bids.Now, not everyone is successful, but what this shows is a trend that has been improving over the past two years that we've been blogging.Granted, our blogs aren't traditional "blogs", in that we don't feel the need to post when we have nothing fresh to say. No, our goal is connecting lovers of fine tools with , well, more fine tools! We hope this describes you and if so we encourage you to check-out all of our "Tool-Hunter" blogs.You'll find them listed on our launch page at this link:http://tool-hunter.blogspot.com
Thanks for joining us, and please drop us a line if anything comes to mind that you'd like to see on these blogs; or if you have a tool to promote.
As a woodworker Shopsmith stands out as a great supplier of tools, but H. Gerstner & Sons is the pinnacle of craftsmanship. They've made machinist's tool chest from wood since 1906! I've been shopping for them for some time, and like this blog I've started a blog to make it easy for me to store my refined eBay search links and other data that I've collected over the years. Some of the links on the blog will lead to tool chests from resellers like Woodcraft and Amazon, and other links will be to tool chest plans and parts.
Drop by http://gerstner-tool-chest-hunter.blogspot.com and check it out.
You can be the first to know if something new is added to this blog (Or any other site of interest for that matter). Visit http://www.watchthatpage.com/ and sign up for a free account. You can then add any url to your personal list and you'll be emailed should anything change. I've used this site for several years to keep track of changes on one of my favorite sites: http://www.woodshopdemos.com/ which is a site that rarely changes. Test it out with our blog and you'll be the first to know if anything changes!
If you are not familiar with a mortise lock, it helps to study the lockset on the door closest to you at this moment. On most doors on modern homes in the USA the lockset is what is called a bored lock. This means that the door most often has a 2 1/8” in diameter through hole that the mechanism that the knobs are mounted to is inserted. From the edge of the door another hole is bored that intersects with the large through hole. This is for the bolt, which is the little plunger that latches the door.
In most of Europe and in high-end applications in the USA, the lock of choice is called a mortised lock. Unlike the bored lock the majority of the machining takes place on the edge of the door; where a slot (or mortise) is cut. The mortise is usually around ¾” (19mm) wide, 5-6 inches long and 3 ½” deep. These dimensions vary quite a bit, and I’ve seen these lock that required a mortise that was 1 ¼” wide. The mortise permits a very complex and versatile lock box to be installed into the door, yet from the face of the door only a small hole is required for the levers or knobs and the cylinder that the key enters.
Traditionally mortise locks have been installed by chopping the waste away with a set of chisels or with a traditional mortising machine; but both methods were slow and prone to tear-out, but all that changed when Porter-Cable introduced the Speedmatic ULM. “Speedmatic” was Porter-Cable’s catch-all name for their router line, but the ULM was something totally new. The tool clamped onto the edge of the door with two integral clamps, which also automatically centered the mortise on the door’s edge. Once everything was clamped into position the stop is set for the mortise’s depth; usually about 1/8 - 1/4" deeper than the actual measurement of the lock box. The router is turned-on and then the fun begins. As you turn a crank the unit slowly climbs and then descends the length of the jig, moving slightly deeper for each successive pass. Your reward for all this is a beautifully machined mortise that is dead-center on the door’s edge.
Porter-Cable made some improvements to the tool over the years, primarily as their routers improved. The current tool is known as the Porter-Cable 513 and it comes equipped with the venerable Porter Cable 690 router motor. ¾” and 1” carbide-tipped cutters are available which allow the tool to produce the proper width mortise. Unlike standard router bits, these cutters have female threads and mount like a flycutter on the threaded end of a mandrel which is chucked into the router motor. This long and strong steel mandrel is further supported by a massive ball-bearing. These cutters are readily available online from Amazon.com for around $25 each.
The list price, which I firmly believe is only paid by fools and Government officials (but I repeat myself) is $2092.10. If you have the grey matter to read this far into a long and boring post , then you are the kind of person who will find this tool online for around $1000. Used 513's run between $400-800, depending on the age and condition of the tool. In my opinion you want to own the newer Porter-Cable 513 version; not only because of the improvements that have been made in the tool, but because of the readily available support parts which can be found on P-C’s own support site and even on Amazon.
Here’s a link to a pdf of the current owners manual: Porter-Cable 513 Lock Mortiser Owners Manual
For whatever reason, there's suddenly a lot of action on eBay with used P-C 513 mortisers! Here's a link to any current Porter-Cable 513 Lock Mortiser for Sale on eBay
Here's a link to the Porter-Cable 513 Lock Mortiser on Amazon
Click here for Delta/Rockwell Unisaw Tablesaws For Sale
Click here for Delta/Rockwell UniFence Uni-Fence For Sale
Click here for Delta/Rockwell Uniguard Uni-Guards For Sale (Very light activity)
Click here for Mobile Base For Sale
Here's a couple videos of the New Delta Unisaw from IWF
See more pictures of the new Uni-Saw at Popular Woodworking
Very light listings, but this tool is sweet and worth the wait.
Click here for Porter-Cable Biscuit Joiners For Sale
Click here for Delta/Rockwell Sanders For Sale
If you are not familiar with this saw a quick check of the 14" bandsaws being offered by all the other power tool companies will quickly reveal that this was the model for most of the 14" saws on the market.
One feature that few have equaled is the lower blade guide.This is almost totally hidden from view, so it was one of the important details that the Clones were able to skimp on while no one was looking.
If you can afford the original US made Delta or Rockwell you will not regret the additional investment, and should you ever decide to resell it, you'll get ever dollar back and then some.This is something that the imports cannot claim.
Well, with everyone's help we made it to the second round, but we were not one of the top 15 finalists.Oh well, at least lost to some spectacular competitors. Thanks for you help.
One of my favorite sites that I’ve been visiting for the past year or so is Instructables.com. Instructables is a site where lots of creative and crazy people like me share their projects in a step by step instructional thingie called an Instructable.
Some of you know that my son was inspired by a comment in the movie "Talladega Nights" and just HAD to have a Six Cheese Nacho Fountain at his October 2008 wedding.
Instructables is now having a contest and we have entered this project in it and we need your vote to help put us over the top!We used Shopsmith tools throughout, and there are lots of pictures and videos included.
There are actually three rounds of voting, so in this first round you can vote for any and as many of the Instructables that you like.The second round is judged by the editors at Instructables and some editors from Popular Science!
In order to vote you'll need to register, which is a fast 30 second ordeal.I been visiting this site for over a year and can confirm that that they don't send unwanted emails or sell your info.
The voting began on Jan 5th and runs through the 11th, so please feel free to forward this to all your friends.
Here’s how to vote in three easy steps:
Step 1) Click this LINK and Register.This is done by click on the "Sign up now" link on the top right of the page at the link below.
Step 2) Once you register search the term “Aristocob” or “Cheese Fountain”.
Step 3) Click on the VOTE NOW! Link.Some folks are apparently "ranking" the Instructable, with is fine, but that's not the same as voting.The VOTE NOW! link will not work if you don't register.
Thanks for your support and we'll let ya know how things go!
Make it a great day, Scott